Low-Density Polyethylene – Slightly clearer than HDPE and far more flexible, mostly used for flexible packaging, carrier bags, flexible tubes, film applications etc. Like HDPE it has restricted transparent properties. It possesses excellent chemical resistance to alcohols, acids and alkalis. Limited resistance to hydrocarbon solvents and mineral oils. It will start to degrade when exposed to UV radiation for extended periods.

High-Density Polyethylene – Slightly opaque white appearance used extensively in rigid bottle packaging, injection moulded caps and closures, crates etc. Its inherent whiteness can restrict the level of transparency achievable. HDPE possess better chemical and solvent resistance than LDPE.

Polypropylene (Homopolymer, Block Copolymer, Random Copolymer)
PPCO Random & PPHO – Fairly clear polymer used in caps and closures. Also used to manufacture houseware products, buckets toys and storage boxes. Polypropylene is flexible with no real restrictions to colour or effects. Random copolymer is clearer than homopolymer and more suitable for translucent colours.
PPCO Block – PPCO but modified for greater impact strength. The additive turns the polymer white giving it a high level of opacity. This can restrict the transparency achievable.

Polyethylene Terephthalate – Polyesters are mechanically very strong and have good chemical resistance and barrier properties. PET is commonly used for making carbonated drink bottles. In addition, polyester can be spun and used to make textiles for clothes. PET is very clear which makes it good for translucent packaging, although a slight ‘yellowness’ can affect very light tints.

Polybutylene Terephthalate – a thermoplastic crystalline engineering polymer that is often used as an insulator in electronics industries. It is a type of polyester with an excellent balance of properties and processing characteristics.

General Purpose Polystyrene – Glass clear but with very little impact strength it is most commonly used in CD cases. Its high level of clarity makes it good for translucent colours although an occasional violet tint can be visible.

High Impact Polystyrene – GPPS with the addition of an impact modifier to give greater impact strength. This additive turns the polymer white, various grades give different levels of opacity. Generally used for games pieces, toys etc. Its high level of whiteness makes translucent colours difficult to achieve. Specialist versions such as K-Resin and Styrolux are available on the market to give the same translucency as GPPS.

Acrylonitrile Butadiene Styrene – A tougher version of HIPS used in components with a higher added value. ABS is more durable than components manufactured in HIPS although it shares its difficulties in matching translucent colours. Like HIPS specialist translucent grades are available. Due to its durability, ABS is utilised in the manufacture of casings for power tools.

Polyamide (6, 66) – Nylon is a general-purpose grade which is widely used for mechanical construction and maintenance. This is due to its optimal combination of mechanical strength, stiffness and mechanical damping properties, together with a good electrical insulating ability. This is why electrical housing is made from nylon. PA66 is commonly used as a replacement for metal in various applications, the chemical and physical properties of PA6 are very similar to PA66. PA6 has better impact resistance and solubility resistance than PA66, but its moisture absorption is also stronger.

Styrene Acrylonitrile Copolymer – Transparent and with excellent chemical resistance, heat resistance and gloss, SAN also has good rigidity, tensile and flexural strength. Due to its high gloss appearance, SAN tends to be used in cosmetic packaging applications. SAN can cause problems when colouring in light tints due to the violet dyestuffs present in it. These are used to visually ‘clean it up’ when manufactured.

Polyethylene Terephthalate Glycol – PET with glycol added. The Glycol is added to give better flow properties but decreases the strength. PETG can be extruded to form bottles and into sheets to make ‘blister’ type packaging.

Thermoplastic Elastomer / Thermoplastic polyurethane – TPU has many applications including automotive instrument panels, caster wheels, power tools, medical devices, and a variety of extruded film, sheet, and profile applications. TPEs are used in a variety of applications in the automotive, medical, construction, electrical, appliance, packaging, and industrial markets.